21 January 2011

Superstar 10mm QR Through Axle

You might be wondering what this item is for. It allows you to run a 10mm axle bolt through hub in a frame designed for a standard skinny quick release. Same as a 15 or 20mm axle fork is stiffer than a standard quick release, this gives a stiffer rear end than standard. Normally you'd need a frame with specific dropouts.
This one works like a normal quick release, and unlike a specific 10mm you don't even have to remove it completely to get the wheel out. I ride a 2008 Orange Five, which is great, but I was interested to see whether the rear could be stiffened without paying for a replacement Maxle swingarm.

Superstar 10mm QR through axleIf you have a rear hub like a Hope Pro 2, conversion kits are available so you don't have to replace the hub & get the wheel rebuilt. I'm not sure I'd have bothered if the cost was going to be high, but the Superstar QR is £7.99 post free & the Hope 10mm kit was £20.99, so worth a go.

Anyway, the important thing, does it make any difference? Well just had a quick blast & straight away I could tell it all felt more solid. Sidehops normally show up a bit of flex on landing but with the new set up things were much improved.

This should mean holding lines on rough trails will be better, which is the kind of thing I'm after. 90% sure it will based on the 1st ride. If it ends up making no difference I'll add a comment.

7 comments:

  1. Excellent tip, I've just placed an order for one!

    I'm guessing this is the right conversion kit for a Hope Pro2?
    http://www.chainreactioncycles.com/Models.aspx?ModelID=18761

    ReplyDelete
  2. Yep that's the one to use, I notice CRC are out of stock but lots of other shops will have them for about the same price.

    ReplyDelete
  3. Just to update, it seems to do it's job off road. No drama, just solid & haven't noticed any flex yet. It wasn't rubbish before, but it's more confidence inspiring & removes a distraction which can only be good.

    ReplyDelete
  4. Once again feeling happy and proud to say that this is my favorite Blog. The postings are very unique and also outstanding performance with the new creativity and Excellency with the new different ideas and concepts. Really I am waiting for some more new posts from you. Keep up your Excellency and efficiency in this same levels.

    Regards:-
    mtb helmets

    ReplyDelete
  5. I run both my On One HT (Superstar Switch hub) and my Orange 5 (Hope Pro2 Evo) with 10mm Bolt thro. Makes a difference and would recommend changing particulary when ordering new wheels, did'nt cost any extra for the Superstar hub just £7.99 for the 10mm bolt.

    ReplyDelete
  6. would these fit a 20mm front axle, for normal 10 mm dropouts??

    ReplyDelete
  7. No, it's for a rear hub with 10mm bolt through fitting, so that you can use it in a standard QR frame & get extra stiffness & better tracking. More for full sus bikes.

    They do this for front hubs: http://superstar.tibolts.co.uk/product_info.php?cPath=32&products_id=286

    You can use this with normal QR forks if you have a 9mm bolt through hub to increase stifness.

    ReplyDelete